| Professor Skid has answered... |
|
|
|
| Question by: |
Steve 22/08/2011 23:47:24 |
| Question: |
Skid, what is the best method for making the post holes in a lexan body. I really chewed mine up last time with a drill bit and it looked awfull! |
|
| |
 |
The wise one answers:
There are special tools you can buy for this but i normally do use a drill bit but on a very slow speed, use a 6mm bit in a cordless screwdriver or even a hand powered drill. Good idea to support the shell underneath too with wood etc while you drill. You can even use a decent screwdriver. |
|
|
| Submit
your own question | Back to questions |
