TOM
asks:
Hi Skid...Is it better to spray paint a driver's helmet or brush paint on?... |
 |
Professor says:
I think sprayed gives a better finish but a decent brushed finish can look perfectly ok. Personally ... Read
more... |
|
wondering
asks:
I have an old aluminum chassis in a tamiya bag part no. 66 whats it go to?... |
 |
Professor says:
That.. is a very rare part young man if its new in its packet and worth something? It is for the Cou... Read
more... |
|
Paul sturgess
asks:
How you doing prof? Can you please tell me what size motor pinion I need for my Mk 1 wild willy? And... |
 |
Professor says:
I'm good thanksh! Sorry, the MK1 Wild Willy came with a factory fitted pinion gear on the motor and ... Read
more... |
|
woo
asks:
Hi Prof, I have a esc that runs two motors with 2x7.2 batteries either parallel or in series as 14.4... |
 |
Professor says:
In parallel is obviously fine but in series i think 14.4v will be too much for a silver can. In fact... Read
more... |
|
David
asks:
Hi, I'm restoring an original Sand Scorcher to box art spec. Where can I get repro decals from? I ha... |
|
Professor says:
It's a good question and has become a problem since the Tamiya clamp down. To be fair Tamiya were in... Read
more... |
|
joe smyth
asks:
What is the largest lipo battery I can use in my original monster beetle?... |
 |
Professor says:
The biggest that will fit in the battery space? For a Monster Beetle i would stick with a 2 cell lip... Read
more... |
|
barry cooper
asks:
hi need one of ur advice, im tryin to take the old paint off from bodyshell.. tried everything no lu... |
|
Professor says:
I have used nitro fuel before and it worked very well and others use DE-solv-it grafitti remover. Al... Read
more... |
|
Piers
asks:
I have bought an old Technigold with bearings that sound like a horse trotting down the road. Any id... |
|
Professor says:
Hmm sorry i can't be exact but it should be easy to measure one, the inside (bore) is 3mm i think. A... Read
more... |
|
kenny
asks:
alwright professor.. need ur help.. im thinkin of buyin brushless motor for my tt-01 golf gti.. do i... |
|
Professor says:
You will certainly need an ESC that is designed for this motor. normally you can get a compatible un... Read
more... |
|
Shady
asks:
How does one go about removing minor scratches from the black plastic Mountaineer radio box and get ... |
|
Professor says:
I have had some success using elbow grease and car automtive polish, some might not like the super s... Read
more... |
|
Dannieboy
asks:
I have a Tamiya Super Champ that I am restoring. I have managed to repair most of the body but the ... |
 |
Professor says:
It depends if you need loads of strength for running. If not then i would certainly stick with ABS, ... Read
more... |
|
e
asks:
how to fix leaky shocks on sand scorcher... |
|
Professor says:
If they're the vintage ones many people install them upside down which helps, there's no easy fix th... Read
more... |
|
zambo*76
asks:
Hi prof wot do you think of tamiyas ndf01 nitro buggys i manage too a new in box unsed one.I gave th... |
|
Professor says:
I'm not a fan of nitro to be perfectly honest because i found them tempermental and with modern lipo... Read
more... |
|
pete g
asks:
I've changed the body on my Schumacher 1/10 ,I cut the aereal down so its overall length is about 7 ... |
|
Professor says:
Just try changing one thing at a time and putting all new batteries in everything. Never cut the ant... Read
more... |
|
Carlos
asks:
Thanks for the sound advice prof. The boomy is now sitting on CC-01 wheels for the time being. Have ... |
|
Professor says:
No problem at all fella! My pleashure ;-)... Read
more... |
|
terry
asks:
would a tamiya subaru brat body fit a tamiya clodbuster... |
|
Professor says:
Any body would fit any car/truck as long as you are prepared to manufacture some body mounts to suit... Read
more... |
|
Daniel Martin
asks:
How can I find parts for my Tamiya RC car? It's a "Ligire JS9 Matra (RA-1010)" I think they were sol... |
|
Professor says:
Usual places - www.ebay.com or www.tamiyaclub.com... Read
more... |
|
Guss
asks:
Hi. I've got a brand new repsol rs cosworth and I've painted the shell but had a change of mind. I'v... |
|
Professor says:
Just use lots of strips of maksing tape and cut around the windows when applied.... Read
more... |
|
Carlos
asks:
Hi prof, another quick question.
What whhels and tyres would comfortably fit on a boomerang, prefe... |
|
Professor says:
All the old 4WD drives up to the Thundershot will have wheels to fit your Boomy. Failing that. New w... Read
more... |
|
Carlos
asks:
Hi Prof, am having probs with the boomerang(again), Ive found a lot of play in the front arms. What ... |
|
Professor says:
There's no Tamiya conversion. Try thin washers between the arms and and gearbox, where the screw pin... Read
more... |
|
|
Page: < 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10
|
| |
|
|
