Austin Powers
asks:
Hey Skid, remember me?
Would you be so kind and please tell me the length of your rod? Uhm I mean t... |
 |
Professor says:
They are just threaded rods with Tamiya 3mm ball connectors on either end, so just adjust them to su... Read
more... |
|
Conker
asks:
Hi Skid! What lexan paint (PS-no.) should be used for the HotShot body, as Tamiya101's build article... |
 |
Professor says:
What you need is Tamiya 'Bright Red' PS34 colour. Backing the normal red with white or something mig... Read
more... |
|
Marco Migani
asks:
I'm looking for the manual of Tamiya Wild One. Can you help me find a manual or copies. Thanks Marco... |
 |
Professor says:
If you go to this website you'll be able to download manuals after registering..
www.tamiyabase.com... Read
more... |
|
zambo*76
asks:
Hi prof in wot year did tamiya first brougth out the guide books as im starting too collect them.... |
 |
Professor says:
This a tough one. MMmmmmm I would say around 1975-77? Pre Rough Rider/Sand Scorcher.... Read
more... |
|
paul
asks:
whats the best sort of grease to use in ball diffs other than usual tamiya diff grease, would anti w... |
|
Professor says:
It's really important that you use a silicon based ball diff grease that is intended for that purpos... Read
more... |
|
me
asks:
what color is the bruiser... |
|
Professor says:
Blue... Read
more... |
|
John
asks:
Hi prof, i was thinking if a brushless set can be used with a subaru brat. thanks. ... |
|
Professor says:
You can put a brushless setup in anything that would normally accept a 540 motor as most brushless s... Read
more... |
|
smifffy
asks:
can you point me in the direction of any info on what i need to upgrade / buy to get rid of the clac... |
|
Professor says:
You can use re-release Frog bevel gears or even the re-release FAV but it depends what is making the... Read
more... |
|
Dave
asks:
Hi Prof, can you recommend a NiMh battery that will fit in the battery box of a 2010 SS, in the regu... |
 |
Professor says:
Hmmm didn't Tamiya themselves sell a reduced size battery for this purpose padded with foam? Perhaps... Read
more... |
|
John Karliss
asks:
With all the vintage re-releases in recent years (Frog, Brat, etc.) why has Tamiya not re-released t... |
 |
Professor says:
That's like asking me 'why is it raining today'?
I don't work for Tamiya or own it. I just get litt... Read
more... |
|
Len Young
asks:
What do the initials F S stand for on the rear shock guard on the super champ ?... |
|
Professor says:
Mmmmm 'Floating Shuspenshion' I think?... Read
more... |
|
zambo*76
asks:
Hi prof is there any way of improving my shocks on my 2010 s/s.... |
|
Professor says:
Try shome Tamiya touring car shocks, they should fit straight on! Nott scale, but great for a runner... Read
more... |
|
happyman
asks:
Hi professor! I wonder if you can help me. I own a Leopard 1a4 original from 1977. But its all made ... |
|
Professor says:
So shorry, my knowledge is based on the R/C world. Plastic kits I've never been in to as you can't p... Read
more... |
|
Chris C
asks:
Why did Tamiya not supply the correct decals to do the alternative Red / Yellow Sand Scorcher Scheme... |
|
Professor says:
It's a valid point but remember in many kits there are difference between the boxart and the actual ... Read
more... |
|
zambo*76
asks:
Hi prof just too let you i went on modelsport web site and neerly wet my self the 4x4 bruiser coimg ... |
|
Professor says:
Personally i think that's plain crazy! People around the world have gone mad if they spend that kind... Read
more... |
|
Brent
asks:
Hi Prof Skid. I have the Wild One as a runner and find accasionally the diff locks up, it doesn't ta... |
|
Professor says:
Hmm well it sounds like you've done all the right things. Certainly the driveshafts partially pullin... Read
more... |
|
greyson
asks:
i have a fox. where a screw goes to connect the skidplate and the frame broke off. should i get a lo... |
|
Professor says:
It's going to have to be a longer screw. Unless you are the really lucky one's to find a new chassis... Read
more... |
|
matt c
asks:
I have a quattro body shell that is in excellent condition but has been painted to a very poor stand... |
|
Professor says:
I've used nitro fuel before and it worked pretty well on a Hotshot body. I have read good things tho... Read
more... |
|
darren hobbs
asks:
what is the best shock upgrade for a tamiya hotshot, whilst keeping the same standard setup.... |
|
Professor says:
Your better off just fitting a HP Suspension set. As fitted to the Supershot.... Read
more... |
|
matt c
asks:
Looking at the holiday buggy rere am i right in saying that the rere decals are nigh on identical to... |
|
Professor says:
Yes the stripes are the same, but most of the other decals are different. ... Read
more... |
|
|
Page: < 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10
|
| |
|
|
