ed
asks:
Can a "(No.84113) Tamiya Buggy Champ Rough Rider Sand Scorcher Ball Differential" be installed in a ... |
 |
Professor says:
Not tried it yet, but would have thought so.... Read
more... |
|
Jessie Williamson5864
asks:
Can you install vintage axle and hubs such as the Blazing Blazer/Hilux on the modern version of the ... |
 |
Professor says:
MMmmmm You can do anything you like if you put your mind to it ;-) I've seen it done a few times so ... Read
more... |
|
Karl
asks:
Hi skid me again.wots the best method/tool to use for doing the holes in the body?the hotshot articl... |
 |
Professor says:
I have a special tool for doing the body holes and it works a treat! It's a cone cutter that you hol... Read
more... |
|
JesWilliamson
asks:
I was wondering if Tamiya would ever re/re any vintage 3 speeds such as the Blazing Blazer or Bruis... |
|
Professor says:
I really doubt it as they have gone to the trouble of releasing all the new type 3 speeds. You never... Read
more... |
|
Bill Smith
asks:
What is the approximate value of an all original 1987 Tamiya Clodbuster - used but nothing broken?... |
 |
Professor says:
The Clod is another victim of Tamiya's crazy re-release spree! They used to be worth good money, but... Read
more... |
|
turbobungle
asks:
what other tyres will fit original Subaru Brat wheels? Or what other wheels/tyes will fit Subaru Bra... |
 |
Professor says:
No other Tamiya tyres will fit. But you can fit any wheels from the SRB (Scorcher, Rough Rider) ramg... Read
more... |
|
tom
asks:
any chance of a super champ re release? What does your infinite wisdom tell you?... |
|
Professor says:
There were rumours, but just rumours. I don't think Tamiya will. In my opinion they would be better ... Read
more... |
|
clodhopper
asks:
Good Afternoon Professor, Re sloppy steering on Wild Dagger (et al.) The servo saver is just too we... |
|
Professor says:
An old trick is to put a tie wrap around the servo saver tight. That might help. But it was never a ... Read
more... |
|
Karl
asks:
Hi skid im gonna be starting my hotshot build soon.which is the best all round pinion gear to use 13... |
|
Professor says:
No fella, other way round. Smaller the gear lower top end but quicker of the mark. Higher gear faste... Read
more... |
|
Lukas
asks:
Hi Professor Skid:
I'd like to know what the differences are between the porsche 934 and the 935 Ch... |
|
Professor says:
I think it's just the front bumper and wheels?... Read
more... |
|
Rob Petrucci
asks:
I'm currently building an original Bigwig & having trouble painting the cover. Is there a trick or s... |
|
Professor says:
I fitted the side stripes decals first so you could see where to paint.... Read
more... |
|
Toni
asks:
Hi professor skid.
Dont like the Top force body but the chassis is great. Do you know if Blazing St... |
|
Professor says:
It should fit, but the body mounts will have to be altered.... Read
more... |
|
Andrew
asks:
Hi prof - I have a new-ish Grasshopper here with a lot of play in each axle (you can move 'em in and... |
|
Professor says:
My gran ushed to shay "if it'sh not broke, leave it alone" Run it until shomething dropsh off! ... Read
more... |
|
Karl
asks:
Hi skid i,ve just bought a hotshot underguard.is it safe to charge the battery while still in the ca... |
 |
Professor says:
No problem at all! Love those underguards! My faveourite hop-up ;-)... Read
more... |
|
vmavalero
asks:
i want to start racing rc's as a hobby, i bought a vintage collection of sand scrocher, cam am lola,... |
|
Professor says:
The best one round a track would be the F40. Forget the rest! Good luck.. your gona need it ;-)... Read
more... |
|
Danny Davis KyoshoTomahawk-SRB-Dan
asks:
Hey there Prof! what you think of my Decal tip which I always use to make it soo eeessseeey to apply... |
|
Professor says:
Yeah great idea. But nothing new as it's been done like that for years. I don't do it though as i'm ... Read
more... |
|
Pat Willson
asks:
I have an originol holiday buggy which I restored, but I could not find the front front body mount ... |
|
Professor says:
A peice of flat ally bent into shape should do.... Read
more... |
|
froggy
asks:
Hi Prof - when painting a lexan shell, do you trim then paint, or paint then trim? Fanx...... |
|
Professor says:
I've done both in the past, but now I paint then trim. Saves you having to mask all the outside for ... Read
more... |
|
Karl
asks:
Hi sid I've just bought a hotshot.can i power my acoms GR-24 MICRO reciever by 7.2 using a TEU-104BK... |
|
Professor says:
Sid?! I'd look at your instructions for the reciever or look it up on the net.... Read
more... |
|
paul
asks:
Hi, do u no if any drive shafts or uj's will fit the avante 2001 of any other model of tamiya, ie w... |
|
Professor says:
Never tried modern drive shafts in a vintage car. It's the length thats the key. If they are cheap a... Read
more... |
|
|
Page: < 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10
|
| |
|
|
