Monkey
asks:
This piece was cogent, well-writetn, and pithy.... |
 |
Professor says:
Why thank you sir!... Read
more... |
|
Nicknick
asks:
Hi Professor. I want to upgrade the shocks on my SS because after each run there's no more oil in th... |
 |
Professor says:
I assume your Sand Scorcher is the vintage original? The shocks on these indeed did leak badly but t... Read
more... |
|
janb37
asks:
Hi prof, what if i buy a sand scorcher 2010 from the us? they have 110 V and inbelgium we have 220 V... |
|
Professor says:
Should be no problem my friend. If the kit is supplied with a mains charger then that might not work... Read
more... |
|
ryan govan
asks:
Hi, i m thinkin of buyin new tamiya stadium blitzer.. is it good? give me good advice cheers.... |
 |
Professor says:
"Good" really depends on if it does what you want from it. They are certainly a quick, fairly strong... Read
more... |
|
Matt
asks:
Prof, You reccomend a GT 25T motor for the Hotshot and Boomerang! I have a Sport tuned motor which ... |
 |
Professor says:
Apparently some sport tuned motors are 23T and others are 27T. I've certainly noticed a difference i... Read
more... |
|
janb37
asks:
hi prof, is the sand scorcher exactly the same as the rough rider? is the body the only difference o... |
|
Professor says:
You would only need the front body post to fit a Sand Scorcher body, this fits over the top of the s... Read
more... |
|
Hudz
asks:
G'day mate would you know where to find info & get parts for a wescom turbo 4x4? it was given to me ... |
 |
Professor says:
I'm sorry chap but i don't have information personally. I would try community forums and Google.... Read
more... |
|
Pamela Yugeknockers
asks:
That stevo's a bit of alright int ee, is he married? Great scrundies by the way me darlin...... |
|
Professor says:
He is married and yes I do try my best thank you!... Read
more... |
|
Alex (tc member the green beetle)
asks:
Can I spray a lexan body with Tamiya Primer on the OUTSIDE of the body and spray it with regular TS ... |
 |
Professor says:
No. Sorry! You can but then it would just flake off unless you use a proper plastic primer, but I st... Read
more... |
|
Steve
asks:
Just out of interest professor, do you have to look up and find out all the info you give out, or is... |
|
Professor says:
LOL that's a good question young man! There's a lot of stuff in my head but I do occasionally look s... Read
more... |
|
Matt
asks:
Hi professor, do you know if there is an adapter for a TT01 so that a 380 motor can be fitted inste... |
|
Professor says:
Sorry i don't know of a specific adapter for the TT01 but you might be able to use something like a ... Read
more... |
|
dave
asks:
sorry i wasnt trying to sound aggressive. i was happy with my first answer and just trying to tie th... |
|
Professor says:
I was only kidding young man! ;-)... Read
more... |
|
dave
asks:
i just asked about how long to charge a 7.2 VOLT 2700MAH NI-MH HUMP BACK BATTERY and i have found 2 ... |
|
Professor says:
Don't take that tone with me young man when I'm trying to help! I'll make you wash my underpants! An... Read
more... |
|
dave
asks:
i recently bought 7.2 VOLT 2700MAH NI-MH HUMP BACK BATTERY but i have no idea how long i should char... |
|
Professor says:
It sounds like you need to buy a new charger to me. That does it all for you and you don't need to w... Read
more... |
|
Matt
asks:
Professor, I am thinking of buying a Hotshot but I've never actually seen one in the flesh. How mu... |
|
Professor says:
I'm not sure of the size od gear you want to put in but there aint much room in a Hotshot I'm afraid... Read
more... |
|
Steve
asks:
Hi Skid, I have been trying to dye my Hotshots wheels black but not had much luck! Do you know if ... |
|
Professor says:
You would need a set of Dark Impact wheels & tyres. The Hotshot tyres wont fit and you will need whe... Read
more... |
|
rhoribeck
asks:
i have a tamiya manta ray and the speed regulator is borken i think when i move the forwards trigger... |
|
Professor says:
Check all the wires first to see if any are loose or broken, especailly the motor wires. Then make s... Read
more... |
|
Steve
asks:
Hi Skid, The ESC has a heat sinc built in! Is there an aditional one I can fit? I have looked on ... |
|
Professor says:
Just look for any type of electronic heat sink that will stick on top of the heat sink already built... Read
more... |
|
Dave Butler
asks:
Hey Prof. Is it true that Tamiya are re-releasing the Solar Eagle as model number 58500? Assuming it... |
|
Professor says:
Well i don't think there's any truth in this at all. I wouldn't be surprised to see this model again... Read
more... |
|
Joe
asks:
Hi prof,I have a question about the Rising Fighter - I know it's not one of the first 100 but it loo... |
|
Professor says:
If I was you I'd get used to the 540 motor it's easier than trying to fit a 380! You would need a mo... Read
more... |
|
|
Page: < 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10
|
| |
|
|
