Let me answer your questions, no matter what you want to ask I will try and help! Watch the Professor's video intro...

Ask your question:
Your name:
Question:
  Verify Code
Verify code: Please enter the numeric code above.
 
 
Latest questions answered:
Page: <  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  10

woomagic asks:
Hi Prof, could you settle a debate I'm having with some friends? What 'turn' are the standard 540 mo...
Professor says:
The standard kit silver cans are 27 turn. Some (but not all) of the sport tuned black motors are 23 ... Read more...

kev the rev asks:
Does a sand scorcher body fit on a TL-01. ...
Professor says:
Yesh it does!... Read more...

hotshot boy asks:
Hi I have couple rere kits and 1 came with the 101bk ESC (lunchbox van) but it jumps about when quic...
Professor says:
You need to go through the set up routine of the ESC with the instructions it came with. Make sure t... Read more...

janb37 asks:
hello prof, are the wheels from the monster beetle the same as on the blackfoot and mud blaster? and...
Professor says:
Yesh they are. But the Lunch box wheels are smaller but with the same hubs.... Read more...

Nige asks:
The Grasshopper body.What polish would you suggest to get that white body gleaming?Thanks....
Professor says:
You can use car polish but i would certainly recommend a lick of paint, lacquer and then polish it u... Read more...

Arnaud asks:
Hi,Skid, Do a Clod or a F-150 stepside body fit on a 3 speed chassis like the Hilux or the Bruiser?...
Professor says:
The clod is better, the F150 is a little short, actually the clod shell is very similar to the blaze... Read more...

kev the rev asks:
I have a tl-01 with a sports turned taming motor and I bought it a nice set of 5.5 inch wheels to go...
Professor says:
Gosh thanks! Shame to see smoke when you were having such fun! If the wheels are genuinely this size... Read more...

Steve asks:
Prof, Is there much advantage to connecting the steering servo on a SS directly to the steering arms...
Professor says:
Yes it does seem to help a lot, we normally run the servo up front with a standard hornet etc servo ... Read more...

Rich asks:
Hi. I havel a Celica grb with a technigold. Can you recommend a esc to replace the old msc. Also do ...
Professor says:
Well you could use any esc rated down to about 19 turns, mtronics, lrp or others would work well and... Read more...

Nick asks:
hello your skiddness question wondering if the astute chasse would fit in a mad cap? cheers Nick...
Professor says:
Yes, but you would also need many other parts including a new body and undertray so it's not a quick... Read more...

scaniahubnut asks:
thought i was a bit wierd reading the old books and watching them iffy videos ... makes me feel a lo...
Professor says:
You're welcome young man. Remember, next time, you're not alone!... Read more...

Dunky asks:
Hello Professor Skid, is it possible to mount the front arms of the Grasshopper II / Super Hornet / ...
Professor says:
I think you can do this with a few adjustments. Not tried it myself but the chassis are very simlar... Read more...

Doc asks:
Skid, Can I use a 3 channel receiver with a two channel radio? I only need two channels but I can g...
Professor says:
As long as its the same freq it should be ok.... Read more...

steve asks:
Skid, How water tight are the new SRB's straight out of the box. I saw a vid from Clumber park wher...
Professor says:
Well the new one is about the same as the original. They're not really waterproof at all! They're re... Read more...

ryan govan asks:
hi, ive got vintage kyosho sierra cosworth which are great.. i was wonder does any 200mm bodyshell w...
Professor says:
I'm sorry did someone change the website to kyosho101.com?

Seriously, i'm not sure, your best... Read more...

Sven Svenson asks:
Hay Prof' Hows it hangin'....I need a front windscreen for a blackfoot, would a blackfoot extreme o...
Professor says:
I would sat no they wont fit. But could they be made to? Mmmmmmmmmm It's hanging more in the middle... Read more...

Steve asks:
All knowing one, I have a Acoms teckniplus TX which is 27mhz AM. I need to get a receiver for it, ...
Professor says:
You got it! You need everything to match the TX. 27mhz am or it wont work.... Read more...

Steve asks:
Hi again Skid, about the Blitzer Beetle nose cone! Is it just my eyes or is it different from the SS...
Professor says:
Your eyes don't deceive you young man. The light recesses are deeper and it's overall an ugly lookin... Read more...

P Bradley asks:
Hello Professor. A mate of mine the other day reckons he'd seen you in a movie wiping your bottom on...
Professor says:
Dam! I knew someone would see it?! ;-) Yesh it was me when I was young and daft!... Read more...

Dunky asks:
Dear Professor, if decals/stickers gets peeled themself of the shell, is there a way to re-glue t...
Professor says:
Reports on this subject are varied. It is possible to insert very small pieces of double sided carpe... Read more...

Page: <  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  10
 

 
 
 
 
 
 
 
Click here to visit Fusion Hobbies - All your Tamiya favourites in stock

Website by Pixel-Concepts