Steve
asks:
Hi skid, Will a Blitzer Beetle nose cone fit the 2010 SS body?... |
 |
Professor says:
Yesh! No problem at all.... Read
more... |
|
Dave Ball
asks:
i have just purchased 2 super fighters which came with the teu-104bk esc.After having built one the ... |
 |
Professor says:
Try the ESC first then if not it does sound like it could be the motor.. Yes, if it's not surpressed... Read
more... |
|
Nick
asks:
Hello professor
Just bought a king cab the thread on the rear axles are rounded off what other ax... |
 |
Professor says:
None that I know of as these are a special length. You could get someone to drill them and insert a ... Read
more... |
|
Steve
asks:
Thanks for that Skid, I used a non tamiya primer, I did sand the body first but only with 1500grit ... |
 |
Professor says:
Never tried it to be honesht. Try it first on a small spot or another shell you're not bothered abou... Read
more... |
|
Steve
asks:
Hi Skid, I am painting my SS two tone colours. I have primed it then sprayed the light colour first... |
|
Professor says:
Well it depends on what paint and masking tape you are using. I assume you're "keying" the plastic a... Read
more... |
|
Bill Rose
asks:
I have a gravelhound with a hellfire 24 turn motor and a 4600 venom battery will changing the spur g... |
 |
Professor says:
Yes in theory, a bigger spur gear will create less top speed and more torque and vice versa. Pinion ... Read
more... |
|
trick
asks:
Do u no how long the alloy hop up option shocks both front and rear should be, i have 2 sets of each... |
|
Professor says:
MMmmmmmmmm I'm good but not this good? Which shocks & what car etc?... Read
more... |
|
rally blaster
asks:
Pro, what glue works best on celica gr b
chassis ? My brat had a roll and now the motor spins but ... |
|
Professor says:
Glue to do what?
Just strip the Brat gearbox down and have a look, could be the pinion gear needs ... Read
more... |
|
Bill Rose
asks:
What is the top speed of a gravelhound?... |
|
Professor says:
18.8 MPH on a flat level shurface with no wind and a shtandard shet up with a fully charged Ni-Mh ba... Read
more... |
|
Todd Jobson
asks:
Professor your Holiday Buggy conversion article is a work of genius. Is it true that you have been a... |
|
Professor says:
Yesh it is true and we are working on some cutting edge technology! ;-)... Read
more... |
|
Dunky
asks:
Hello Mr Fancy Pants, do the C.V.A. mini front shocks II (50519) fit to the good old Hornet/Grasshop... |
|
Professor says:
I've never seen these fitted to any Hornet/Grashopper at all so I wouold say no, they wont fit. ... Read
more... |
|
paul
asks:
will a brushless setup work in an old avante 2001 or egress, if so wot turn motor would it be limite... |
 |
Professor says:
Yes it would work no problem. But I wouldn't do it! THose cars are fragile enough without adding ext... Read
more... |
|
Steve
asks:
Hi Prof,
In relation to my last question regarding my ESC! I have sorted it. I won't tell what I ... |
|
Professor says:
Oh good. This sheems to be the case with most of us guys?! ;-)... Read
more... |
|
jessie williams
asks:
hello pro, do you know if any more furture re-re are coming out soon and if so which one, or ones... |
|
Professor says:
I get to know most things through the Tamiya grape vine, but pin pointing certain ones is not fair o... Read
more... |
|
super champ
asks:
Is this true that Tamiya is going to re-re the Toyota Celica Rally Car?... |
|
Professor says:
You'll have to wait and see.. Like us all ;-)... Read
more... |
|
rallyblaster
asks:
Hi I have a brat with an rs540sh motor an a 1500 battery. I would like to upgrade motor and battery... |
|
Professor says:
A bigger motor & a bigger battery.. It's a simple as that! ;-) Try one of Tamiya's upgrade motors, t... Read
more... |
|
mark
asks:
hy i have been putting my ten turn in my supersaber and the accelartion i slow then i put it in my f... |
|
Professor says:
Try a smaller pinion gear. But that is one seriously quick motor! The old Tamiya's wont last long wi... Read
more... |
|
robert gill
asks:
do you know if the front knuckle uprights are still available for the hotshot 1 5847 kit do you kno... |
|
Professor says:
No shorry, the original parts went out of production years ago. But, your in luck as the re-release ... Read
more... |
|
slimmy
asks:
Professor, I have a vintage avante with a carbon fiber chassis kit. All vintage. But the body is som... |
|
Professor says:
It is my belief that the re-re shell and wing are identical moulding to the original hurray!... Read
more... |
|
old skool
asks:
My Lobo is about to be restored, and I am wondering what kind DOWNGRADES are necessary for it to com... |
|
Professor says:
You could try taking the tyres off or disconneting the battery? That'll eliminate the risk of unwant... Read
more... |
|
|
Page: < 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10
|
| |
|
|
