| Question by: |
smiffffy 17/02/2013 19:15:27 |
| Question: |
Hi prof upgraded my monster beetle drives with brat/frog re-re ones and it works fine, got myself a blackfoot original 80's and thought i'd do the same , so bouht the same drive shaft kit, it seems to keep slipping the dogbone out of joint on one side, looking at the back of the BF and MB i notice the BF sits a lot higher with the old black type shocks being much longer than the yellow MB ones, thus the drive shaft is at a higher drive angle i.e about 45degrees, I am assuming if i replace the BF shocks for MB ones my problem is solved, do you know if i should have bought a different re-re drive set for the BF than the MB. Its jsut that looking at the MB compared to the BF it makes the MB look like a low rider with the standard shocks on. Any ideas once again greatly received.
|
|
