Let me answer your questions, no matter what you want to ask I will try and help! Watch the Professor's video intro...

Ask your question:
Your name:
Question:
  Verify Code
Verify code: Please enter the numeric code above.
 
 
Latest questions answered:
Page: <  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  10  >

lxsid asks:
Can you use a brushless motor in a hot shot or super hot shot. Are there any modifications you woul...
Professor says:
Yes a 540 sized brushless motor would fit, no mods required. Watch your gearboxes though! I wouldn't... Read more...

super champ asks:
I know true Tamiya collectors hate Re-Re, but do you know when Tamiya will release the Fox ONLY beca...
Professor says:
I think it's very soon. August/early Sept?... Read more...

Jonathan asks:
I found my old avante 2001 in the loft good condition is it worth anything...
Professor says:
Yes absolutely. Sorry but no idea how much because it depends on so many factors. Please see our art... Read more...

Fatmanur asks:
I told my grandmother how you hepeld. She said, "bake them a cake!"...
Professor says:
That will do for me!,... Read more...

peter asks:
Wild Willy 1 m38 tires are almost non existant these days, is there any other wheels/rims that fit?...
Professor says:
No I'm afraid they are the only wheels/tyres that fit unless you can somehow make adaptors?... Read more...

Bond 007 asks:
Hi prof, loving your work, could you tell me if 62mm Gmade aeration shocks would fit to the front of...
Professor says:
Yeah they should fit fine. ... Read more...

super champ asks:
Do you have any idea or clue on how to make the driver head and arms move with the steering of an rc...
Professor says:
Check out our articles section. Rad22rad and his amazing snap on scorcher!... Read more...

danny owens asks:
Hello prof! I've just bought a comm lathe in order to refresh and maintain my brushed motors, incl...
Professor says:
Google it. As long as you have the model no?... Read more...

Dan asks:
Hi will the 52t counter gear from the frog fit a monster beetle as mine has had it ????...
Professor says:
No sorry, the gearing is different.... Read more...

Binbin asks:
Hello Prof., I have just got back my old Bigwig, it is not too bad state and I wish to give it the ...
Professor says:
Hi, it's a tricky one but nitro fuel is well regarded and having tried it once on a Hotshot shell it... Read more...

GrassHopper asks:
Are there any modern tires that fit on the original grasshopper wheels? ...
Professor says:
Sorry not that i know of, the 3 piece beadlock design is very good but modern tyres are mostly desig... Read more...

James asks:
Dear Prof. I'd like to know, what i would have to pay for a complete, but abused Tamiya frog…. woul...
Professor says:
Thanks for the compliments. Sorry but it's impossible to value a model without seeing it. It sounds ... Read more...

Steve asks:
Professor, I am in the market for a 4wd runner/basher! Out them all, the Hot shot range, Avante and...
Professor says:
Hmmm i think it's a question of taste and also what you want from the model. Personally i'm a big fa... Read more...

tamiya-in-distress asks:
Hola amigo! Any tips or advice on repairing a hairline crack in a Fox lower, rear wishbone? Any tip...
Professor says:
If you read a couple of questions below you'll find a good answer ;-)... Read more...

boomeranger asks:
Hi Prof. When I pick up my re-re Boomerang off the floor and run the motor, the front wheels and arm...
Professor says:
Hmm a number of possibilities. You could have a bent drive cup or buckled wheel. Try it without whee... Read more...

danny owens asks:
No question this time! Just wanted to say what a top quality website you run - brilliant!! Thanks n...
Professor says:
Well thank you kind sir!... Read more...

naughty rascal asks:
Proffesor, you are the vintage Tamiya king but can you answer one question.....are you related to Al...
Professor says:
Well, that's a good one. I've not been asked that before but i see the resemblance. Perhaps we're di... Read more...

Danny Owens asks:
one more question Proffesor...... are the Boomerang drive shafts the same as the Hotshot front or r...
Professor says:
Sorry no they're not. The Boomerang longer shafts as it has more suspensio travel. Possibly the Boom... Read more...

zambo*76 asks:
Hi prof have you guys ever put a bruiser shell on to a bullhead.It looks realy good.You should try i...
Professor says:
Mmmm interesting idea. You never know with us ;-)... Read more...

danny owens asks:
Hi Prof. I've just bought the Fox from njmlondon that's pictured in the 'latest community photos'.....
Professor says:
Lovely car! The Fox is a strong car but comes with its faults. Standard drive shafts dont last long,... Read more...

Page: <  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  10  >
 

 
 
 
 
 
 
 
Click here to visit Fusion Hobbies - All your Tamiya favourites in stock